|
 T-Series
Krebs T-Series Classifying Cyclones
Krebs T-Series Classifying Cyclones are available in 10, 15, and 20 inch (254, 381, 508 mm) diameters. These hydrocyclones feature a unique lower cone arrangement that permits ultra fine separations ranging from a near 100 to 250 mesh (0.149 to 0.060 mm) D95 separation size - a capability that will increase your recovery. This special cone design, together with the standard Krebs involute-style entry and optional full cylindrical section, produces finer separations and allows higher feed slurry flow rates.
Exceptional abrasion resistance is achieved by using high purity alumina ceramic in the lower cones and silicon carbide ceramic in the upper sections. Alternatively, the entire hydrocyclone can be supplied with molded urethane liners at a lower initial cost. Urethane liners can be replaced with ceramic liners at a later date for longer wear life and reduced maintenance.
Applications
- Raw Coal Classifying
Due to higher capacity the 15 and 20 inch (381 and 508 mm) hydrocyclones are very well suited for this duty (fewer hydrocyclones to maintain and less complex manifolds result). Usually a 15 inch (381 mm) design will be recommended if no flotation circuit is in the flowsheet.
- Clean Coal Classifying & Effluent Recovery
Due to the higher recovery rates of the 10 and 15 inch (381 and 508 mm) T-Series Classifying Cyclones, all the fine particles that are washed will be recovered from a dilute stream and transported to downstream dewatering equipment.
|
 |
| |